Mercedes-Benz

Inflating the collapsible spare wheel

Requirements:

Mount the collapsible spare wheel as described. More
Remove the tyre inflation compressor from the stowage space under the boot floor. More

NOTE Damage to the collapsible spare wheel when lowering the vehicle

Lowering the vehicle without previously inflating the collapsible spare wheel can damage its rim.

Inflate the collapsible spare wheel using the tyre inflation compressor before lowering the vehicle.

NOTE Overheating due to the tyre inflation compressor running too long

Do not run the tyre inflation compressor for longer than ten minutes without interruption.

Pull connector

and the hose out of the housing.

Unscrew the cap from the valve on the collapsible spare wheel.

Screw union nut

of the hose onto the valve.

Make sure on and off switch of the tyre inflation compressor is set to 0.

Insert plug

into the cigarette lighter socket More or into a 12 V socket More in your vehicle.

Switch on the power supply More.

Press on and off switch

on the tyre inflation compressor to

The tyre inflation compressor is switched on. The tyre is inflated. The tyre pressure is shown on manometer .

Pump the tyre to the specified tyre pressure.

The specified tyre pressure is printed on the yellow label of the collapsible spare wheel.

When the specified tyre pressure has been reached, press on and off switch

on the tyre inflation compressor to

If the tyre pressure is higher than the specified pressure, press pressure release valve button

until the correct tyre pressure has been reached.