The ECO start/stop function is available only in the ,
,
,
and
drive programs (depending on the setting).
you brake the vehicle to a standstill in transmission position
or
.
![](../../assets/images/80ac732e572393f0354ae3656178cc46_1_-----.png)
![](../../assets/images/bccebbd55723941e354ae3656178cc46_1_-----.png)
you stop behind a vehicle that is pulling away.
you stop at a stop sign when there is no vehicle in front of you.
you turn the steering wheel hard at a low speed.
In transmission position , the engine is not switched off automatically even when the HOLD function is switched on.
you release the brake pedal in transmission position
when the HOLD function is not active.
you engage transmission position
or
.
you depress the accelerator pedal.
an automatic engine start is required by the vehicle.
the symbol
(green) appears when the vehicle is at a standstill: the engine was switched off by the ECO start/stop function.
the symbol
(yellow) appears when the vehicle is at a standstill: not all vehicle conditions for an engine stop have been met.
neither the symbol
nor
appears when the vehicle is at a standstill: an intelligent stop inhibitor was detected, e.g. a stop sign.
the symbol
OFF appears: the ECO start/stop function is deactivated or there is a malfunction.
switch on the HOLD function in transmission position
or
.
you engage transmission position
.
If the engine was switched off by the ECO start/stop function and you leave the vehicle, a warning tone sounds and the engine is not restarted. The display message Vehicle is operational Switch off ignition before exitingalso appears in the multifunction display. If you do not switch off the ignition, the ignition is automatically switched off after three minutes.
The ECO start/stop function is available only in the ,
,
,
and
drive programs (depending on the setting).
you brake the vehicle to a standstill in transmission position
or
.
you depress the brake pedal when travelling at a low speed.
![](../../assets/images/752616e45723948c354ae3656178cc46_1_-----.png)
you stop behind a vehicle that is pulling away.
you stop at a stop sign when there is no vehicle in front of you.
you turn the steering wheel hard at a low speed.
you release the brake pedal in transmission position
when the HOLD function is not active and one of the following conditions are met:
drive program
or
is not selected.
drive program
or
is selected but the vehicle does not start to move.
drive program
or
is selected, the vehicle is moving at a speed of more that 20 km/h and Glide mode is not activated.
you engage transmission position
or
.
you release the brake pedal, the vehicle is not in Glide mode and it starts to move on a gentle downhill gradient at a speed below 3 km/h.
you depress the accelerator pedal.
an automatic engine start is required by the vehicle.
the symbol
(green) appears when the vehicle is at a standstill: the engine was switched off by the ECO start/stop function.
the symbol
(yellow) appears when the vehicle is at a standstill: not all vehicle conditions for an engine stop have been met.
neither the symbol
nor
appears when the vehicle is at a standstill: an intelligent stop inhibitor was detected, e.g. a stop sign.
the symbol
OFF appears: the ECO start/stop function is deactivated or there is a malfunction.
If, in spite of an intelligent stop inhibitor, the engine should be switched off by the ECO start/stop function, activate the HOLD function or engage transmission position .
If the engine was switched off by the ECO start/stop function and you leave the vehicle, a warning tone sounds and the engine is not restarted. The display message Vehicle is operational Switch off ignition before exitingalso appears in the multifunction display. If you do not switch off the ignition, the ignition is automatically switched off after three minutes.