Lowering the vehicle after a wheel change
Requirements:
The new wheel has been fitted More.
To lower the vehicle:
turn the crank of the jack anti-clockwise until the vehicle is once again standing firmly on the ground. 
Tighten the wheel bolts evenly in a diagonal pattern in the order indicated 
to 
with an initial maximum force of 80 Nm.
to with an initial maximum force of 80 Nm. Tighten the wheel bolts evenly in a diagonal pattern in the order indicated to to the specified tightening torque of 130 Nm.
to to the specified tightening torque of 130 Nm. WARNING Risk of accident due to incorrect tightening torque
The wheels could come loose if the wheel bolts or wheel nuts are not tightened to the prescribed torque.
Ensure that the wheel bolts or wheel nuts are tightened to the prescribed tightening torque.
If you are not sure, do not move the vehicle. Contact a qualified specialist workshop and have the tightening torque checked immediately.
Check the tyre pressure of the newly fitted wheel and adjust it if necessary.
Vehicles with tyre pressure loss warning system: restart the tyre pressure loss warning system More.
Exception: the new wheel is an emergency spare wheel.
Vehicles with a tyre pressure monitoring system: restart the tyre pressure monitoring system More.
Exception: the new wheel is an emergency spare wheel.