Mercedes-Benz

Setting up Wi-Fi

Requirements:

The device to be connected supports one of the three means of connection described More.

Multimedia system:

Activating/deactivating Wi-Fi

Switch Wi-Fi on

or off

If Wi-Fi is deactivated , communication via Wi-Fi to all devices is interrupted. This also means that a connection to the HERMES communication module cannot be established. Then functions such as dynamic route guidance with Live Traffic Information are not available.

Connecting the multimedia system with a device via Wi-Fi

This function is available if a HERMES communication module is not installed.

The type of connection established must be selected on the multimedia system and on the device to be connected.

The connection procedure may differ depending on the device. Follow the instructions that are shown in the display. Further information (see the manufacturer's operating instructions).

Select Internet settings.

Select Search for Wi-Fi networks.

Using a WPS PIN

Highlight a Wi-Fi network in the list.

Select

Connect using WPS PIN input.

The multimedia system generates an eight-digit PIN.

Enter this PIN on the device to be connected.

Confirm the entry.

Using a button

Requirements:

This function is only available in a Wi-Fi frequency of 2.4 GHz.

Highlight a Wi-Fi network in the list.

Select

Connect via WPS PBC.

Select "Connect via WPS PBC" in the options on the device to be connected.

Press the WPS button on the device to be connected.

Select Continue in the multimedia system.

Using a security key

Highlight a Wi-Fi network in the list.

Select

Connect using security key.

Have the security key displayed on the device to be connected (see the manufacturer's operating instructions).

Enter this security key on the multimedia system.

Confirm the entry with

All devices support a security key as a means of connection.

Device has already been connected:

To automatically connect:

highlight a Wi-Fi network in the list.

Activate

Connect automatically

To connect:

highlight a Wi-Fi network in the list.

Select

Connect.

The connection is established again. These functions are possible when the device has already been connected to the Wi-Fi network.