Fitting a new wheel
Requirement:
The wheel is removed More.
WARNING Risk of accident from losing a wheel
Oiled, greased or damaged wheel bolt/wheel nut threads or wheel hub/wheel mounting bolt threads can cause the wheel bolts/wheel nuts to come loose.
As a result, you could lose a wheel while driving.
Never oil or grease the threads.
In the event of damage to the threads, contact a qualified specialist workshop immediately.
Have the damaged wheel bolts or damaged hub threads replaced.
Do not continue driving.
Observe the information on the choice of tyres More.
For tyres with a specified direction of rotation, an arrow on the side wall of the tyre indicates the correct direction of rotation. Observe the direction of rotation when fitting.
NOTEDamage to the ceramic-brake disc when changing a wheel
Mercedes-AMG vehicles with ceramic-brake discs: during removal and repositioning of the wheel, the wheel rim can strike the ceramic-brake disk and damage it.
Take particular care.
Ask another person for assistance or use a second centring pin.
Slide the wheel to be mounted onto the centring pin and push it on.
WARNING Risk of injury from tightening wheel bolts and nuts
If you tighten the wheel bolts or wheel nuts when the vehicle is raised, the jack could tip.
Only tighten wheel bolts or wheel nuts when the vehicle is on the ground.
For safety reasons, only use wheel bolts which have been approved by Mercedes-Benz and for the wheel in question.
Tighten the wheel bolts until they are finger-tight.
Unscrew the centring pin.
Tighten the last wheel bolt until it is finger-tight.
If the collapsible emergency spare wheel has been fitted, inflate the collapsible emergency spare wheel .
Lower the vehicle More.