and 
if all vehicle conditions for an automatic engine stop are met in the following situations: if you brake the vehicle to a standstill in transmission position
or 
. you engage transmission position
. you depress the brake pedal when driving at speeds below 20 km/h.
The needle of the rev counter points to zero in the multifunction display.
you release the brake pedal with the transmission in position
when the HOLD function is not active and the vehicle does not start to move. you engage transmission position
or 
. you release the brake pedal and the vehicle starts to move on a gentle downhill gradient at a speed below 5 km/h.
you depress the accelerator pedal.
you change the vehicle level.
you open or close the soft top.
an automatic engine start is necessary.
If the engine was switched off by the ECO start/stop function and you leave the vehicle, a warning tone sounds and the engine is not restarted. The display message Vehicle is operational Switch off the ignition before exiting also appears in the multifunction display. If you do not switch off the ignition, the ignition is automatically switched off after one minute.