Inflating the emergency spare wheel
NOTE Overheating due to the tyre inflation compressor running too long
Do not run the tyre inflation compressor for longer than ten minutes without interruption.
Comply with the manufacturer's safety notes on the sticker of the emergency spare wheel and on the tyre inflation compressor.
Remove the tyre inflation compressor from the stowage space under the luggage compartment floor More.
Remove sticker 
from the tyre inflation compressor housing and affix it to the instrument cluster within the driver's field of vision.
from the tyre inflation compressor housing and affix it to the instrument cluster within the driver's field of vision. 
Pull filler hose 
and plug 
out of the tyre inflation compressor housing.
and plug out of the tyre inflation compressor housing. Insert plug 
of filler hose in the socket on the tyre inflation compressor and then turn it until plug engages.
of filler hose in the socket on the tyre inflation compressor and then turn it until plug engages. Unscrew the cap from the valve on the emergency spare wheel.
Screw union nut 
of filler hose onto the valve.
of filler hose onto the valve. Make sure on and off switch 
of the tyre inflation compressor is set to
of the tyre inflation compressor is set to 0
. Insert plug in a socket in your vehicle.
in a socket in your vehicle. Turn the key to position 
in the ignition lock.
in the ignition lock. Press on and off switch on the tyre inflation compressor to
on the tyre inflation compressor to I
. The tyre inflation compressor is switched on. The tyre is inflated. The tyre pressure is shown on manometer 
.
Pump the tyre to the specified tyre pressure.
The specified tyre pressure is stated on the label of the emergency spare wheel.
When the specified tyre pressure has been reached, press on and off switch on the tyre inflation compressor to
on the tyre inflation compressor to 0
. The tyre inflation compressor is switched off.
Turn the key to position 
in the ignition lock.
in the ignition lock. If the tyre pressure is higher than the specified pressure, press pressure release valve button 
until the correct tyre pressure has been reached.
until the correct tyre pressure has been reached. Unscrew union nut of filler hose from the valve.
of filler hose from the valve. Screw the valve cap of the emergency spare wheel onto the valve again.
Stow filler hose and plug in the lower section of the compressor housing.
and plug in the lower section of the compressor housing. Stow the tyre inflation compressor in the vehicle.