Lowering the vehicle after a wheel change
Requirements:
The new wheel has been fitted More.
Place the ratchet ring spanner onto the hexagon nut of the jack so that the lettering "AB" is visible.
To lower the vehicle:
turn the ratchet ring spanner of the jack anti-clockwise. 
Tighten the wheel bolts evenly in a diagonal pattern in the order indicated (
to 
).
to ). Specified tightening torque:150 Nm.
WARNING Risk of injury through incorrect tightening torque
The wheels could come loose if the wheel bolts or wheel nuts are not tightened to the prescribed tightening torque.
Make sure the wheel bolts or wheel nuts are tightened to the prescribed tightening torque.
If you are not sure, do not move the vehicle. Consult a qualified specialist workshop and have the tightening torque checked immediately.
Check the tyre pressure of the newly mounted wheel and adjust accordingly.
Vehicles with tyre pressure loss warning system: restart the tyre pressure loss warning system More.
Exception: the new wheel is an emergency spare wheel.
Vehicles with a tyre pressure monitoring system: restart the tyre pressure monitoring system More.
Exception: the new wheel is an emergency spare wheel.
Make sure to observe the following further related subject:
Notes on tyre pressure More