The charging cable control panel shows the current status of the charging process.
Display | Meaning |
---|---|
Lights up white | The supply voltage is connected. |
Display | Meaning |
---|---|
Flashes green | The high-voltage battery is charging. |
Display | Meaning |
---|---|
Lights up red | The green LED flashes simultaneously: overtemperature – the charging performance is reduced. The green LED does not flash: overtemperature – the charging process is stopped. |
Flashes red | Overtemperature at the mains plug – the charging process is stopped. |
Display | Meaning |
---|---|
Flashes red | Charging cable malfunction – cannot carry out the charging process, reset the charging cable operating unit. |
Lights up red | White LED is off: power supply malfunction – cannot carry out the charging process, replace the mains socket. White LED is on: vehicle malfunction – cannot carry out the charging process, reset the charging cable operating unit. |
When all four displays light up, the charging cable operating unit performs a self-test.
If temperature monitor indicates a malfunction, it may help to protect the charging cable from direct sunlight.
To reset the charging cable operating unit: if safety system indicates a charging cable malfunction or the vehicle, first reset the charging cable operating unit. To do this, disconnect the charging cable from the vehicle and from the mains socket and wait for approximately 5 seconds. If the malfunction persists after the charging cable is reconnected, charging at the mains socket is not possible. The charging cable must be replaced or the vehicle's charging connection must be checked at a qualified specialist workshop, depending on the indicator.