Care and cleaning products containing solvents can cause surfaces in the cockpit to become porous. When the airbags are deployed, plastic parts may break away.
Bleaching or dyeing seat belts can severely weaken them.
This can, for example, cause seat belts to tear or fail in an accident.
To avoid damage to the vehicle, observe the following notes on cleaning and care:
Clean with lukewarm and soapy water.
Do not use chemical cleaning agents.
Do not dry by heating them to over 80°C or exposing them to direct sunlight.
Switch off the display and let it cool down.
Clean the surface carefully with a microfibre cloth and a suitable display care product (TFT-LCD).
Do not use any other agents.
Clean with a damp microfibre cloth.
For heavy soiling: use a cleaner recommended for Mercedes-Benz.
Do not attach stickers, films or similar materials.
Do not allow cosmetics, insect repellent or sun cream to come in contact with the plastic trim.
Clean with a microfibre cloth.
Black piano-lacquer look: clean with a damp cloth and soapy water.
For heavy soiling: use a cleaner recommended for Mercedes-Benz.
Do not use solvent-based cleaning agents, polishes or waxes.
Clean with a brush or dry shampoo.
Use a carpet and textile cleaning agent recommended for Mercedes-Benz.
Clean with a damp cloth and 1% soapy water solution and then wipe with a dry cloth.
For heavy soiling: use a cleaner recommended for Mercedes-Benz.
Leather care: use a leather care agent that has been recommended for Mercedes-Benz.
Do not allow the leather to become too damp.
Do not use a microfibre cloth.
Leather is a natural product. It has natural surface properties, such as differences in structure, marks caused by growth and injury or subtle colour differences.
Clean with a damp cloth and then wipe with a dry cloth.
Leather care: use a leather care agent that has been recommended for Mercedes-Benz.
Do not allow the leather to become too damp.
Do not use a microfibre cloth.
Clean with a damp cloth.
Do not use a microfibre cloth.
Clean with a damp cloth and 1% soapy water.
Do not use a microfibre cloth.
Clean with a damp microfibre cloth and 1% soapy water and allow to dry.