to soft, light and thin objects, e.g. fingers
over the last 8 mm of the closing movement
The reversing feature therefore cannot prevent someone being trapped in these situations.
press the
button on the key or pull the exterior door handle or
press the appropriate sliding door button in the centre console or
press the button on the door sill or
pull the rocker switch on the door handle
When you open the sliding door, the sliding door could hit other people as it moves towards the rear of the vehicle.
Using the lower guide of the sliding door (carriage) as a step can result in damage to the trim and/or mechanical components of the sliding door.
You must reset the electric sliding door if there has been a malfunction or an interruption in the voltage supply More.
Your vehicle can be equipped with an electric sliding door on the left and/or right-hand side.
Sliding door buttons on the centre console
Sliding door button on the door sill (B-pillar)
Door handle (inside or outside)
Key
The sliding door is equipped with automatic obstacle detection with reversing function. If a solid object blocks or restricts the sliding door during the automatic closing process, the sliding door opens again automatically. If the sliding door is obstructed during the opening procedure, it moves back a few centimetres in the opposite direction and stops.
The automatic object detection with reversing function is only an aid. It is not a substitute for your attentiveness when closing the electrical sliding door.
If an obstacle is detected, the display shows the Left-hand electric sliding door Obstruction detected message, for example, and five warning tones sound.
In unfavourable operating conditions, e.g. frost, ice or heavy soiling, press and hold the appropriate sliding door button. The electric sliding door moves with increased force. Observe that, in such circumstances, the obstacle detection is less sensitive. To stop the movement, release the sliding door button.