Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Accept
  • V-Class
  • 05/2021
app store google play
X

Print
Operating cruise control or the variable limiter
Requirements:
Cruise control
  • Cruise control is selected.

  • The parking brake has been released.

  • ESP® is activated, but may not intervene.

  • The driving speed is at least 30 km/h.

  • The clutch pedal is not depressed.

  • The brake pedal is not depressed.

Requirements:
Variable limiter
  • The vehicle has been started.

  • The variable limiter is selected.

Switching between cruise control and the variable limiter
Press button .
  • LIM indicator lamp off: cruise control is selected.

  • LIM indicator lamp lit: the variable limiter is selected.

Storing and maintaining the current speed
Briefly press the cruise control lever up or down .

The current speed is stored and the vehicle maintains this speed (cruise control) or does not exceed it (variable limiter).

When you activate cruise control, the stored speed is briefly shown in the text field of the multifunction display. The multifunction display also shows the symbol and the stored speed.

When you activate the variable limiter, the multifunction display briefly shows the stored speed. The multifunction display also shows the symbol and the stored speed.

For vehicles with Active Distance Assist DISTRONIC, the segments between the start of the scale and the stored speed light up in the speedometer dial instead.

Calling up the stored speed
WARNING Risk of accident due to stored speed

If you call up the stored speed and this is lower than your current speed, the vehicle decelerates.

Take into account the traffic situation before calling up the stored speed.
Briefly pull the cruise control lever in direction .

The last stored speed is called up and the vehicle maintains this speed (cruise control) or does not exceed it (variable limiter).

If the last stored speed has previously been deleted, the currently driven speed is stored.

When you switch off the vehicle, the last speed stored is cleared.

Increasing or reducing the speed
Press the cruise control lever up or down as far as the 1st pressure point.

The stored speed is increased or reduced by 1 km/h.

or
Press the cruise control lever up or down beyond the 1st pressure point.

The stored speed is increased or reduced by 10 km/h.

If you have set Miles as the unit for the digital speedometer, you can maintain any speed from 20 mph (cruise control) or set it as the limit speed (variable limiter). You can then set the limit speed in increments of 1 mph and 5 mph.

Deactivating cruise control or the variable limiter
Briefly press the cruise control lever forwards .
or
Press button .

The or symbol and the stored speed in the multifunction display then go out.

Cruise control is deactivated in the following situations:
  • you apply the brakes.

  • you drive below a speed of 30 km/h.

  • you shift the transmission to position .

  • ESP® intervenes.

In these cases the variable limiter remains activated.

If you deactivate ESP®, or ABS or ESP® is malfunctioning, cruise control and the limiter are deactivated.

Vehicles with manual transmission: if the engine speed is very low, cruise control or the limiter is deactivated. When the transmission is in neutral or the clutch pedal is depressed for longer than six seconds, cruise control is deactivated.

If cruise control automatically deactivates, a warning tone sounds and the Cruise control off message appears briefly in the multifunction display.