Mercedes-Benz

Installing and removing the seat/bunk combination

WARNING Risk of accident and injury as a result of rear bench seat not being engaged

If the rear bench seat is not engaged, it may be flung around during travel.

Always make sure that the rear bench seat is engaged as described.

In order to ensure that the rear bench seat can securely engage, keep the seat guide rails and anchorages in the vehicle floor free of dirt and foreign objects.

If the indicator tab of the seat anchorage is not retracted into the seat leg, the seat is not correctly engaged. Engage the seat again.

Removing the seat/bunk combination

A seat/bunk combination may not be fitted in the face-to-face position.

In vehicles with a seat rail system, carry out the release, removal and subsequent reinstallation of a rear bench seat only at the marked basic setting.

If necessary, remove the bed extension More.

Remove the stowage compartments More.

Fold the release handle for rear seat anchorage

up.

Tilt the seat/bunk combination forward using the upper edge of the seat backrest.

Pull the release handle for front seat anchorages

up.

Hold the seat/bunk combination by the lower edge of the seat cushion.

Fold the seat/bunk combination forwards and lift it out of seat anchorages

Installing the seat/bunk combination

Hold the seat/bunk combination by the lower edge of the seat cushion.

Place the seat/bunk combination into front seat anchorages

from above at the front and allow to engage.

Make sure that release handles for front seat legs

are folded down in the direction of the floor of the vehicle.

Fold the seat/bunk combination back into the seat position.

Press the release handle for rear seat anchorage

downwards until indicator tabs

have fully retracted into the rear seat anchorages.

The rear seat anchorages of the seat/bunk combination are correctly engaged when the seat anchorages engage audibly and indicator tabs on the seat anchorages are no longer visible and have fully retracted into the seat anchorages.