Mercedes-Benz

Installing and removing the comfort rear bench seat

WARNING Risk of accident and injury as a result of rear bench seat not being engaged

If the rear bench seat is not engaged, it may be flung around during travel.

Always make sure that the rear bench seat is engaged as described.

Keep the seat anchorages in the vehicle floor free of dirt and objects at all times to ensure that the rear bench seat engages securely.

If the indicator tab of the seat anchorage is not retracted into the seat leg, the seat is not correctly engaged. Engage the seat again.

Removing the rear bench seat

In vehicles with a seat rail system, carry out the release, removal and subsequent reinstallation of the rear bench seats at the marked basic position only More.

Make sure that all sliders for fore-and-aft adjustment are engaged on both sides.

It should not be possible to move the rear bench seat.

Fold the rear bench seat forwards More.

Pull release handle

upwards.

Grasp the rear bench seat by grab handles

and lift it out of seat anchorages

If the second rear seat row is to be removed or tilted, the seat or bench seat in the first rear seat row must first be tilted forward to avoid damage to the seats.

Installing the rear bench seat

Grasp the rear bench seat by grab handles

and insert it into front seat anchorages

from the front and above at an angle.

Tilt the rear bench seat back and allow it to engage.

Release handles fold down towards the vehicle floor.

Fold the rear bench seat back into the seat position.

The rear seat legs of the rear bench seat are correctly engaged when the seat legs engage audibly and the indicator tabs on the seat legs are no longer visible and have fully retracted into the seat legs.

Slide the rear bench seat into the basic setting More.