Stowage compartment in the rear
Opening the stowage compartment
If necessary, fold up the rear seat.
Turn top rotary catch
clockwise and bottom rotary catch
anti-clockwise.
Remove cover
.
Removing the vehicle tool kit and jack from the tool holder
Depending on the equipment version of the vehicle, the vehicle tool kit and the jack are stowed either in a stowage tray or in a tool holder with a cover.
Remove clamping strap
.
Lift off tool holder cover
.
Carefully pull the vehicle tool kit and jack upwards out of the stowage compartment. Lift the jack slightly before removing it and turn it to a diagonal position in the stowage compartment.
Removing the vehicle tool kit and jack from the stowage tray
Open clamping strap
and remove jack
by pulling it upwards at an angle from the stowage tray compartment.
Remove vehicle tool bag
upwards from the stowage tray compartment.
Stowing the vehicle tool kit and the jack
Stowage compartment with tool holder
Before stowing, wind the jack to the fully closed position and place it so that the handwheel is facing forwards and the plate is facing inwards.
Place the jack and vehicle tool kit into the tool holder.
Replace cover
of the tool holder.
Tighten clamping strap
.
Stowage compartment with stowage tray
Insert vehicle tool bag
into the front compartment of the stowage tray.
Before stowing, wind jack
to the fully closed position and place it so that the hand wheel is facing downwards and the plate is facing inwards at an angle.
Insert jack
into the back compartment of the stowage tray.
Press jack
into the upper holder and fasten clamping strap
.
Closing the stowage compartment
Put on cover
.
Turn top rotary catch
anti-clockwise and bottom rotary catch
clockwise.