you are driving at
40 km/h or the vehicle is stationary.
The indicator lamp in the button is lit when DSR is switched on.
The current speed is stored. When stationary,
When DSR is activated and the vehicle pulls away, accelerates or brakes on an incline, the speed set corresponds to the speed at which the accelerator or brake pedal is released or the cruise control lever is operated during DSR regulation. This is the case only if you are not driving faster than
DSR is activated:
DSR and the set speed appear in the status area of the on-board computer.
DSR is activated, but is not intervening:
You are driving between
18 km/h and45 km/h .DSR is not shown in the status area of the on-board computer. In addition, the - - - km/h message appears briefly.
DSR is in standby mode.
DSR is inactive:
As soon as you exceed a speed of
45 km/h .DSR is not shown in the status area of the on-board computer. In addition, the Off message appears briefly.
You can set the speed to between
The current speed is stored.
The last stored speed is increased or reduced in increments of
It may be a moment before the vehicle starts to brake to the set speed. Take this delay into account when setting the speed with the cruise control lever.
The indicator lamp in the button goes out.
If you drive faster than