Stowage compartment in the rear
Opening the stowage compartment
Stowage compartment in the rear on the right-hand side of the vehicle
If necessary, fold up the rear seat.
Turn top rotary catch 
clockwise and bottom rotary catch anti-clockwise.
clockwise and bottom rotary catch anti-clockwise. Remove cover 
.
. Removing the vehicle tool kit and jack from the tool holder
Depending on the equipment version of the vehicle, the vehicle tool kit and the jack are stowed either in a stowage tray or in a tool holder with a cover.
Stowage compartment with tool holder
Remove clamping strap 
.
. Lift off tool holder cover 
.
. Carefully pull the vehicle tool kit and jack upwards out of the stowage compartment. Lift the jack slightly before removing it and turn it to a diagonal position in the stowage compartment.
Removing the vehicle tool kit and jack from the stowage tray
Stowage compartment with stowage tray
Open clamping strap 
and remove jack 
by pulling it upwards at an angle from the stowage tray compartment.
and remove jack by pulling it upwards at an angle from the stowage tray compartment. Remove vehicle tool bag 
upwards from the stowage tray compartment.
upwards from the stowage tray compartment. Stowing the vehicle tool kit and the jack
Stowage compartment with tool holder
Before stowing, wind the jack to the fully closed position and place it so that the handwheel is facing forwards and the plate is facing inwards.
Place the jack and vehicle tool kit into the tool holder.
Replace cover of the tool holder.
of the tool holder. Tighten clamping strap .
. Stowage compartment with stowage tray
Insert vehicle tool bag into the front compartment of the stowage tray.
into the front compartment of the stowage tray. Before stowing, wind jack to the fully closed position and place it so that the hand wheel is facing downwards and the plate is facing inwards at an angle.
to the fully closed position and place it so that the hand wheel is facing downwards and the plate is facing inwards at an angle. Insert jack into the back compartment of the stowage tray.
into the back compartment of the stowage tray. Press jack into the upper holder and fasten clamping strap .
into the upper holder and fasten clamping strap . The jack is secured.
Closing the stowage compartment
Put on cover .
. Turn top rotary catch anti-clockwise and bottom rotary catch clockwise.
anti-clockwise and bottom rotary catch clockwise. Fold down the rear seat.