Too much load may be placed on the ISOFIX or iSize child restraint systems and the child may not be restrained correctly in the event of an accident, for example.
In the manufacturer's installation and Owner's Manual for the child restraint system used
On a label on the child restraint system, if available
Regularly check that the permissible gross weight of the child and child restraint system is still complied with.
- Always observe the correct use and suitability of the seats for attaching a child restraint system. ISOFIX child seat anchor More
- Always observe the manufacturer's installation and Owner's Manual for the child restraint system used.
- Make sure that the child's feet do not touch the front seat. If necessary, move the front seat slightly forwards.
- When using a Group 0/0+ baby car seat and a Group 1 rearward-facing child restraint system on a rear seat: adjust the front seat so that the seat does not touch the child restraint system.
- Move the rear seat backrest to an upright position before you fit the child seat. Do not adjust the seat backrest when an ISOFIX child restraint system is fitted.
- For certain child restraint systems in weight category II or III, there may be restrictions on the maximum size setting, e.g. due to possible contact with the roof.
- Do not put the child restraint system under strain between the roof and the sitting surface and/or fit it facing the wrong direction.
- Do not put the child restraint system under strain by the head restraint. Adjust the head restraints as appropriate.
Before every journey, make sure that the ISOFIX child restraint system is engaged correctly in both mounting brackets in the vehicle.