Installing and removing the rear seat
WARNING Risk of accident and injury as a result of rear bench seat not being engaged
If the rear bench seat is not engaged, it may be flung around during travel.
Always make sure that the rear bench seat is engaged as described.
In order to ensure that the rear bench seat can securely engage, keep the seat guide rails and anchorages in the vehicle floor free from dirt and foreign objects.
If the indicator tab of the seat anchorage is not retracted into the seat anchorage, the seat is not correctly engaged. Engage the seat again.
WARNING Risk of injury‑ or fatal injury when the last row of seats is rotated 180 °
The vehicle occupants in the rear seats can be injured by unsecured loads.
This poses an increased risk of injury or even fatal injury.
If loads are being transported, never install the rear seats in the last row of seats rotated by 180 °.
Always store and secure objects and loads properly in the vehicle.
WARNING Risk of becoming trapped when adjusting the seats
When you adjust a seat, you may trap yourself or a vehicle occupant.
When adjusting a seat, make sure that no one has any body parts in the sweep of the seat.
Removing
Rear seat folded forward (example: standard rear seat)
Make sure that all carriages for fore-and-aft direction are engaged on both sides.
It should not be possible to move the rear seat.
Fold the seat forwards More.
Remove the cover 
of the floor socket.
of the floor socket. Remove the blind cap from the bracket on the seat.
Press in the sides of the electrical connector 
in the socket 
and remove.
in the socket and remove. Insert the blind cap into the socket and close the floor socket with the cover .
and close the floor socket with the cover . Secure the electrical connector onto the bracket 
on the seat.
onto the bracket on the seat. Grasp the seat by the grab handle 
and fold the two release handles 
upwards.
and fold the two release handles upwards. Move the folded seat towards the front and lift it out.
Fitting
Hold the seat by the grab handle .
. From above, guide the seat in a tilted position into the front seat anchorages 
and allow it to engage.
and allow it to engage. Remove the cover of the floor socket and remove the blind cap from the socket .
of the floor socket and remove the blind cap from the socket . Remove the electrical connector for the seat ventilation and seat heating from the bracket and insert into the socket .
for the seat ventilation and seat heating from the bracket and insert into the socket . Attach the blind cap to the bracket on the seat.
on the seat. Close the floor socket with the cover .
.