Removing/fitting a load protection net
WARNING Risk of injury or death due to objects being poorly secured
The load protection net alone cannot restrain or secure heavy objects, luggage or heavy loads.
You could be hit by an unsecured load during sudden changes in direction, braking or in the event of an accident.
Always stow objects in such a way that they cannot be thrown about the vehicle.
Secure objects, luggage or loads against slipping or tipping over, e.g. by using lashing material, even when you are using the load protection net.
WARNING Risk of injury due to sitting behind a partitioning net
Vehicle occupants can be pressed against the partitioning net. There is a risk of injury.
Never allow vehicle occupants to sit behind the partitioning net.
The load protection net partitions the load compartment. It protects vehicle occupants from light objects and/or luggage slipping or tipping over.
You can install the load protection net at an angle behind the front seats or behind the first row of rear seats.
Observe the notes on securing loads More.
Upper retainer
Floor anchorage (example: secured tie-down eye)
Fitting
Remove the luggage compartment partition if necessary More.
Clip the load protection net into upper retainers 
in such a way that tensioning straps 
face the rear of the vehicle.
in such a way that tensioning straps face the rear of the vehicle. Fit tie-down eyes 
into the guide rails close to the rear seat legs More. Position them at least 5 cm from the seat legs to allow subsequent movement of the rear seat.
into the guide rails close to the rear seat legs More. Position them at least 5 cm from the seat legs to allow subsequent movement of the rear seat. Check that tie-down eyes are seated correctly.
are seated correctly. Tie-down eyes should not move.
Pull tensioning straps of the load protection net tightly.
of the load protection net tightly. Clip hooks 
on tensioning straps into tie-down eyes .
on tensioning straps into tie-down eyes . Fold tensioning element 
up.
up. Pull the loose end of tensioning straps down in the direction of the arrow until tensioning straps are tight.
down in the direction of the arrow until tensioning straps are tight. Fold tensioning element down to achieve the final tension on the straps.
down to achieve the final tension on the straps. If necessary, fit the luggage compartment partition More.
After travelling a short distance, check that the load protection net is taut, and retighten it if necessary.
Removing
Remove the luggage compartment partition if necessary More.
Fold tensioning element up.
up. Tensioning straps are slack.
Unclip hooks of tensioning straps from tie-down eyes at the bottom.
of tensioning straps from tie-down eyes at the bottom. Unclip the load protection net from upper retainers .
. When required, remove tie-down eyes More.
More. If necessary, fit the luggage compartment partition More.
Roll up the load protection net and fasten it, still rolled up, using the Velcro fasteners.
Adjusting the front seat with the load protection net fitted
Fold tensioning element on straps upwards.
on straps upwards. The load protection net slackens.
Correctly adjust the front seat.
Re-tension the load protection net.