Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Accept
  • Sprinter
  • Transporter
  • 03/2018
app store google play
X

Print
Topping up AdBlue®
NOTE Engine damage due to AdBlue® being in the fuel
AdBlue® must not be used to fill the fuel tank.
Only use AdBlue® to fill the AdBlue® tank.
Do not overfill the AdBlue® tank.
NOTE Contamination of the vehicle interior due to AdBlue® leakage
After topping up, carefully close the AdBlue® refill container.
Avoid carrying AdBlue® refill containers permanently in the vehicle.
Requirements:

  • the ignition is switched off

Vehicles with passenger vehicle approval: the following messages that appear in succession in the multifunction display indicate that you need to refill the AdBlue® tank:

  • Refill AdBlue See Owner's Manual

    The AdBlue® tank has dropped to the reserve level.

  • Top up AdBlue Perf. reduced in XXX miles  

    You will only be able to drive the vehicle the distance shown. Refill AdBlue® as quickly as possible.

  • Top up AdBlue Perf. reduced: 12 mph   No start in XXX miles  

    Vehicle speed is limited to approximately 20 km/h. You will only be able to drive the vehicle the distance shown. Subsequently, it will no longer be possible to start the engine.

  • Refill AdBlue Start not possible

    The vehicle can no longer be started.

Vehicles with commercial vehicle approval: the following messages that appear in succession in the multifunction display indicate that you need to refill the AdBlue® tank:

  • Refill AdBlue See Owner's Manual

    The AdBlue® tank has dropped to the reserve level.

  • Top up AdBlue Power reduced

  • Top up AdBlue Performance reduced after eng. restart: 12 mph  

    The vehicle cannot be driven at a speed exceeding 20 km/h after engine restart.

  • Top up AdBlue Performance reduced: 12 mph  

    The vehicle cannot be driven at a speed exceeding 20 km/h.

You can also have the AdBlue® fill level and the AdBlue® range displayed More.

Opening the AdBlue® filler cap on filler caps that are not lockable
Open the bonnet.
Turn AdBlue® filler cap anti-clockwise and remove it.
Opening the AdBlue® filler cap on lockable filler caps
Open the bonnet.
Take tool for unlocking AdBlue® filler cap from the vehicle tool kit.
Pull cover on AdBlue® filler cap up, turn 90° and release.
Insert tool in holes of AdBlue® filler cap .
Turn AdBlue® filler cap anti-clockwise and remove it.
Preparing the AdBlue® refill canister
Variant 1
Variant 2
Unscrew the cap on AdBlue® refill canister .
Screw disposable hose onto the opening of AdBlue® refill canister until hand-tight.
Topping up AdBlue®
Variant 1
Variant 2
Screw disposable hose onto the filler neck of the vehicle until hand-tight.
Lift up and tip AdBlue® refill canister .

The filling process stops when the AdBlue® tank is completely full.

AdBlue® refill canister can be removed when it has been only partially emptied.

Unscrew disposable hose and close AdBlue® refill canister in reverse order.
Switch on the ignition for at least 60 seconds.
start the vehicle.

Avoid storing AdBlue® containers permanently in the vehicle.

AdBlue® refill bottle

Only screw the AdBlue® refill bottle hand-tight onto the filler opening in the engine compartment. It may otherwise be damaged.

AdBlue® refill bottles can be obtained at many filling stations or at a qualified specialist workshop. Refill bottles without a threaded cap offer no overfill protection. AdBlue® may leak out as a result of overfilling. Mercedes-Benz offers special refill bottles with a threaded cap. These are available at any Mercedes-Benz Service Centre.

Unscrew the protective cap from AdBlue® refill bottle .
Place AdBlue® refill bottle as shown on filler opening and screw it on clockwise until hand-tight.
Press AdBlue® refill bottle towards filler opening .

The AdBlue® tank is filled. This could take up to one minute.

When the AdBlue® refill bottle is no longer pressed down, filling stops. The bottle can be removed when it has been only partially emptied.

Release AdBlue® refill bottle .
Turn AdBlue® refill bottle anti-clockwise and remove it.
Screw the protective cap onto AdBlue® refill bottle again.
Filling procedure with the pump nozzle of an AdBlue® filling pump
Insert the pump nozzle into the filler neck and top up with AdBlue®. When doing so, do not overfill the AdBlue® tank.
Closing the AdBlue® filler cap on filler caps that are not lockable
After filling the AdBlue® tank, place AdBlue® filler cap on the filler neck and tighten it clockwise.
Turn the AdBlue® filler cap until the lettering is legible and horizontal.

The filler neck is only locked correctly when this is the case.

Close the bonnet.
Closing the AdBlue® filler cap on lockable filler caps
After filling the AdBlue® tank, place AdBlue® filler cap on the filler neck and tighten it clockwise.
Remove tool from AdBlue® filler cap and store it in the vehicle tool kit.
Pull cover on AdBlue® filler cap up over holes of AdBlue® filler cap , turn and release.
Turn AdBlue® filler cap .

If AdBlue® filler cap turns freely, the AdBlue® tank is closed.