Attaching the child restraint system with the seat belt on the rear seat
When installing a belt-secured child restraint system, observe the following:
Always comply with the manufacturer's installation and operating instructions for the child restraint system used. - For a child restraint system in the "Universal" or "Semi-Universal" category, make sure that the system has been approved for the vehicle seat. Observe the notes under "Suitability of seats for attaching belt-secured child restraint systems" More.
- When using a baby car seat in group 0/0+ and a rearward-facing child restraint system in group I on a rear seat: adjust the front seat so that it does not touch the child restraint system.
- The backrest of the forward-facing child restraint system must, as far as possible, be resting on the seat backrest of the rear seat.
- For certain child restraint systems in weight categories II or III, there may be certain restrictions in the maximum size setting, e.g. due to possible contact with the roof.
- When fitted, the child restraint system must not be braced between the roof and the seat and/or twisted. Where possible, set the seat cushion inclination accordingly.
- The child restraint system must not be put under strain by the head restraints. Adjust the head restraints accordingly.
- Make sure that the child's feet do not touch the front seat. If necessary, move the front seat forward slightly.
Install the child restraint system.
The entire base of the child restraint system must always rest on the sitting surface of the rear seat.
Always make sure that the shoulder belt strap is correctly routed from the seat belt outlet of the vehicle to the shoulder belt guide on the child restraint system.
The shoulder belt strap must be routed forwards and downwards from the seat belt outlet.