Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Accept
  • S-Class
  • Maybach saloon
  • 03/2021
app store google play
X

Print
Fitting an ISOFIX or i‑Size child restraint system on the rear seat
WARNING Risk of injury or death if the permissible gross mass of the child and child restraint system together is exceeded.

Too much load may be placed on the ISOFIX or i‑Size child restraint systems and the child may not be restrained correctly in the event of an accident, for example.

If the child and the child restraint system together weigh more than 33 kg, only use an ISOFIX or i‑Size child restraint system with which the child is secured with the vehicle seat belt.
Also secure the child restraint system with the Top Tether belt, if available.
Always comply with the information about the mass of the child restraint system:

  • in the manufacturer's installation and operating instructions for the child restraint system used

  • on a label on the child restraint system, if present

Regularly check that the permissible gross mass of the child and child restraint system is still complied with.

When fitting a child restraint system, observe the following:
  • Always observe the correct use of the seats and consider their suitability for attaching a child restraint system. ISOFIX child seat securing system Moreor i‑Size child seat securing system More
  • Always comply with the manufacturer's installation and operating instructions for the child restraint system used.
  • Make sure that the child's feet do not touch the front seat. If necessary, move the front seat slightly forwards.
When fitting an ISOFIX child restraint system, also observe the following:
  • When using a baby car seat in weight group 0/0+ and a rearward-facing child restraint system in weight group 1 on a rear seat: adjust the front seat so that the seat does not touch the child restraint system.
  • When using a forward-facing child restraint system in weight group 1: remove the head restraint from the respective seat, if possible. In addition, the backrest of the child restraint system must lie as flat as possible against the backrest of the vehicle seat. After the child restraint system has been removed, replace the head restraints again immediately and adjust them correctly.
  • If the head restraint of the child seat cannot be fully extended when it is installed in the vehicle, this will result in restrictions on the maximum size setting for child restraint systems in weight category II or III. Contact with the roof when the head restraint is fully extended and locked in place will not result in any restrictions on use.
  • The child restraint system must not be put under strain between the roof and the seat cushion and/or be fitted facing the wrong direction. Where possible, adjust the seat cushion inclination accordingly.
  • The child restraint system must not be put under strain by the head restraint. Adjust the head restraints as appropriate.
When fitting an i‑Size child restraint system, also observe the following:
  • When using a rearward-facing child restraint system: adjust the front seat so that it does not touch the child restraint system.
  • When using a forward-facing child restraint system: remove the head restraint from the respective seat, if possible. In addition, the backrest of the child restraint system must lie as flat as possible against the backrest of the vehicle seat. After the child restraint system has been removed, replace the head restraints again immediately and adjust them correctly.

Before every journey, make sure that the ISOFIX child restraint system or the i‑Size child restraint system is engaged correctly in both ISOFIX or i‑Size mounting brackets.

NOTE Damage to the seat belt for the centre seat during installation of the child restraint system
Make sure that the seat belt is not trapped.
Vehicles with reclining rear seats: before an ISOFIX or i-Size child restraint system is installed, tilt the backrest of the reclining rear seat back slightly.
Fold upholstered lining upwards.
Pull the tab on upholstered lining upwards and position it on the supporting surface.

Upholstered lining will remain folded upwards.

Attach the ISOFIX or i‑Size child restraint system to both mounting brackets in the vehicle.
To close, fold upholstered lining upwards.
Lift the tab from the support surface and slide it back into the upholstery slot between the seat backrest and seat cushion. Close the upholstery flap.
Vehicles with reclining rear seats: return the reclining rear seat backrest to an upright position.

The reclining rear seat backrest must be in contact with the child restraint system.