The rear bench seat, rear seat and seat backrest may fold forwards, even while the vehicle is in motion.
As a result, the vehicle occupant will be pressed into the seat belt with increased force. The seat belt will not be able to protect as intended and could cause additional injury.
Objects or loads in the boot or load compartment cannot be restrained by the seat backrest.
If the left and right seat backrests are not engaged and locked in place, this will be shown on the multifunction display on the instrument cluster.
If the centre seat backrest is not engaged and locked in place, the red lock verification indicator will be visible.
Too much load may be placed on the ISOFIX or i‑Size child restraint systems and the child may not be restrained correctly in the event of an accident, for example.
in the manufacturer's installation and operating instructions for the child restraint system used
on a label on the child restraint system, if present
Regularly check that the permissible gross mass of the child and child restraint system is still complied with.
- Always observe the correct use of the seats and consider their suitability for attaching a child restraint system. ISOFIX child seat securing system Moreor i‑Size child seat securing system More
- Always comply with the manufacturer's installation and operating instructions for the child restraint system used.
- Make sure that the child's feet do not touch the front seat. If necessary, move the front seat slightly forwards.
- When using a Group 0/0+ baby car seat and a Group 1 rearward-facing child restraint system on a rear seat: adjust the front seat so that the seat does not touch the child restraint system.
- When using a Group 1 forward-facing child restraint system: the backrest of the child restraint system must lie as flat as possible against the backrest of the vehicle seat.
- For certain child restraint systems in weight group 2 or 3, there may be restrictions on the maximum size setting, e.g. due to possible contact with the roof.
- The child restraint system must not be tensioned between the roof and the seat cushion and/or be fitted facing the wrong direction. Where possible, adjust the seat cushion inclination accordingly.
- The child restraint system must not be put under strain by the head restraint. Adjust the head restraints accordingly.
- When using a rearward-facing child restraint system: adjust the front seat so that it does not touch the child restraint system.
- When using a forward-facing child restraint system: the backrest of the child restraint system must lie as flat as possible against the backrest of the vehicle seat.
Before every journey, make sure that the ISOFIX child restraint system or the i‑Size child restraint system is engaged correctly in both mounting brackets in the vehicle.