Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Accept
  • GLC
  • SUV
  • 03/2020
app store google play
X

Print
Topping up AdBlue®
NOTE Engine damage due to AdBlue® being in the fuel
AdBlue® must not be used to fill the fuel tank.
Only use AdBlue® to fill the AdBlue® tank.
Do not overfill the AdBlue® tank.
NOTE Contamination of the vehicle interior due to AdBlue® leakage
After topping up, carefully close the AdBlue® refill container.
Avoid carrying AdBlue® refill containers permanently in the vehicle.
Requirements:

  • The vehicle is unlocked.

The following messages appear in order in the multifunction display when the AdBlue® tank requires topping up:

  • Refill AdBlue See Owner’s ManualThe AdBlue® level has fallen below the reserve range. Top up AdBlue® immediately.

  • Top up AdBlue Emergency op. in XXX miles   See Owner's ManualThe low AdBlue® level will lead to limited performance after the remaining distance displayed has been driven. Top up AdBlue® immediately.

  • XX,X l  Top up AdBlue Emer. op.: max. XXX km/h  Start not poss. in XXX km The low AdBlue® level will lead to limited performance from the speed displayed. After the remaining distance displayed has been covered, it will no longer be possible to start the engine. Top up with at least the amount of AdBlue® displayed.

  • XX,X l  Top up AdBlue Switch on ignition, wait 60 sec. or eng. start not poss.The AdBlue® tank is empty. You can no longer start the engine. Top up with at least the amount of AdBlue® displayed. Switch on the ignition and wait for approximately 60 seconds. Start the engine.

You can see the AdBlue® range and level in the Service menu in the multifunction display.

The AdBlue® range shown depends strongly on the driving style and operating conditions. The actual range can therefore deviate from the calculated range.

Opening the AdBlue® filler cap
Press on the back area of fuel filler flap .
Turn AdBlue® filler cap anti-clockwise and remove it.

You can also store the AdBlue® filler cap in the fuel filler cap holder in the fuel filler flap hinge arm.

Topping up AdBlue®
Screw on the fastener of AdBlue® refill canister .
Screw disposable hose onto the opening of AdBlue® refill canister until hand-tight.
Screw disposable hose onto the filler neck of the vehicle until hand-tight.
Lift up and tip AdBlue® refill canister .

The filling process stops when the AdBlue® tank is completely full.

AdBlue® refill canister can be removed when it has been only partially emptied.

Unscrew and close disposable hose and AdBlue® refill canister in reverse order.
Replace the AdBlue® filler cap and turn it clockwise.
Close the fuel filler flap.
Switch on the ignition for at least 60 seconds.

If the vehicle could not be started as the AdBlue® tank was empty, it can take up to 60 seconds for the refill to be detected.

Start the vehicle.

Avoid storing AdBlue® refill containers permanently in the vehicle.

Related topics