Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Accept
  • V-Class
  • 06/2020
app store google play
X

Print
Operating the auxiliary heating by remote control (auxiliary warm-air heater)
DANGER Risk of fatal injury due to poisonous exhaust gases

If the tailpipe is blocked or sufficient ventilation is not possible, poisonous exhaust gases such as carbon monoxide may enter the vehicle. This is the case in enclosed spaces or if the vehicle gets stuck in snow, for example.

Always switch the stationary heater off in enclosed spaces without an air extraction systems, e.g. in garages.
Keep the tailpipe and the area around the vehicle free from snow when the engine or the stationary heater are running.
Open a window on the windward side of the vehicle to ensure an adequate supply of fresh air.
WARNING Risk of fire due to hot stationary heater components and exhaust gases

Flammable materials such as leaves, grass or twigs may ignite.

When the stationary heater is switched on, make sure that:
hot vehicle parts do not come into contact with flammable materials.
the exhaust gas can flow out of the stationary heater exhaust pipe unhindered.
the exhaust gas does not come into contact with flammable materials.
NOTE Damage to the auxiliary heating due to overheating

If the flow of hot air is blocked, the auxiliary heating may overheat and switch off.

Do not block the flow of hot air.
NOTE Battery discharge caused by stationary heater or stationary ventilation operation

Operating the stationary heater or stationary ventilation drains the battery.

After heating or ventilating the vehicle twice, drive for a longer period of time.

You can switch the auxiliary heating on and off as well as set the operating duration with a remote control. The remote control must be synchronised with the auxiliary heating system receiver. For more information, please contact a qualified specialist workshop.

Store the remote control for the auxiliary heating such that the auxiliary heating function cannot be switched on unintentionally. In particular, ensure that the remote control is kept out of the reach of children.

The remote control has a range of approximately 300 m. The range is reduced by sources of radio interference or solid objects, for example.

Indicator lamps
Confirms settings
Switches the remote control on/off
Changing the operating duration or cancelling or terminating settings
Indicator lamp lights up in various ways to show different operating modes:
  • Lights up red – remote control switched on

  • Flashes red – auxiliary heating switched off

  • Lights up green – auxiliary heating switched on

  • Flashes green – change operating duration option active

  • Flashes alternately red and green – remote control in synchronising mode

When the remote control battery is weak, indicator lamp will flash red rapidly.

Replace the remote control battery More.

You can find further information on lamp statuses under "Problems with the auxiliary heating" .

Switching the remote control on/off

The remote control will switch to standby mode after ten seconds. Indicator lamp will go out.

To switch on:
press and hold the button until indicator lamp lights up red.
To switch off:
press and hold button until indicator lamp goes out.
Switching auxiliary heating on and off
Switch on the remote control.
To switch on:
when indicator lamp flashes red, press the button.

During data transfer, indicator lamp will light up red.

When indicator lamp lights up green, the auxiliary heating is switched on.

To switch off:
when indicator lamp lights up green, press the button.

During data transfer, indicator lamp will light up red.

When indicator lamp flashes red, the auxiliary heating is switched off.

Changing the operating duration
Switch on the remote control.
When indicator lamp flashes red, press the and buttons simultaneously.

Indicator lamp will flash green.

Press the button repeatedly until the desired operating duration is shown.
  • 20 minutes – indicator lamp will flash green twice.

  • 30 minutes – indicator lamp will flash green three times.

  • 40 minutes – indicator lamp will flash green four times.

Press the button.

During data transfer, indicator lamp will light up red.

When indicator lamp emits two long, green flashes, the selected operating duration is stored.

If no adjustment is made to the operating duration, indicator lamp will flash six times and the remote control will enter standby mode.