Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Accept
  • Sprinter
  • Transporter
  • 03/2018
app store google play
X

Print
Switching hazard warning lights on or off
To switch on and off:
press the button.

If you operate a turn signal indicator while the hazard warning lights are switched on, only the turn signal indicator on the relevant side of the vehicle lights up.

The hazard warning lights will switch on automatically if:
  • the airbag is deployed.

  • the vehicle is sharply braked from a speed of more than 70 km/h to a standstill.

If the hazard warning lights have automatically switched on, press the hazard warning lamp switch to switch them off.

The hazard light lamps will automatically switch off when the vehicle regains a speed of more than 70 km/h after full brake application.

The hazard warning lights work even when the ignition is switched off.

Removing and stowing fire extinguishers
WARNING Risk of accident due to an incorrectly secured fire extinguisher in the driver's footwell

A fire extinguisher in the driver's footwell may impede pedal travel or block a depressed pedal.

This jeopardises the operating and road safety of the vehicle.

Moreover, the fire extinguisher can be flung around in the driver's footwell and injure the driver or other vehicle occupants.

Always store and secure the fire extinguisher in the bracket during the journey.
Do not remove the fire extinguisher while driving.
Removing
Pull the tabs on the bracket of fire extinguisher upwards.
Remove the fire extinguisher.
Stowing
Stow the fire extinguisher.
Push the tabs on the bracket of fire extinguisher downwards.

In a right-hand-drive vehicle, the fire extinguisher is located on the co-driver's seat on the left when viewed in the direction of travel.

Removing the warning triangle

The warning triangle is located in the stowage compartment in the front passenger door.

Take warning triangle out of the stowage compartment.
Removing the first-aid kit

The first-aid kit is located in the stowage compartment in the co-driver's door.

Remove the first-aid kit from the stowage compartment.
QR codes for rescue card

The QR code stickers are affixed to the B-pillar on the driver's and co-driver's side. In the event of an accident, emergency services can use the QR code to quickly determine the corresponding rescue card for your vehicle. The current rescue card contains, in compact form, the most important information about your vehicle e.g. the routing of electric cables.

Further information can be found at Homepage Mercedes-Benz - Rescue card.

Starting assistance and charging the 12 V battery
Always use the jump-start connection point in the engine compartment when charging the battery and jump-starting.
NOTEDamaging the battery through overvoltage

When using a battery charger without a maximum charging voltage, the battery or the vehicle electronics may be damaged.

Only use battery chargers with a maximum charging voltage of 14.8 V.
WARNING Risk of explosion from hydrogen gas igniting

A battery generates hydrogen gas during the charging process. If there is a short circuit or sparks start to form, there is a danger of the hydrogen gas igniting.

Make sure that the positive terminal of the connected battery does not come into contact with vehicle parts.
Never place metal objects or tools on a battery.
When connecting and disconnecting the battery, you must observe the described order for the battery clamps.
When giving starting assistance, always make sure that you only connect battery terminals with identical polarity.
During starting assistance, you must observe the described order for connecting and disconnecting the jump lead.
Do not connect or disconnect the battery clamps while the engine is running.
WARNING Risk of explosion during charging process and starting assistance

During the charging process and starting assistance, the battery may release an explosive gas mixture.

Avoid fire, naked flames, creating sparks and smoking.
Make sure that there is sufficient ventilation during the charging process and during starting assistance.
Do not lean over a battery.
WARNING Risk of explosion from a frozen battery

A discharged battery may freeze at temperatures slightly above or below freezing point.

During starting assistance or battery charging, battery gas may be released.

Always thaw a frozen battery out first before charging it or performing starting assistance.

If the warning/indicator lamps do not light up in the instrument display around or below freezing point, it is very likely that the discharged battery has frozen.

In this case, observe the following points:
  • do not give the vehicle starting assistance or charge the battery

  • the service life of a battery that has been thawed may be reduced drastically

  • the start-up behaviour may deteriorate, particularly at low temperatures

  • it is recommended that you have a thawed battery checked at a qualified specialist workshop

NOTEDamage caused by numerous or extended attempts to start the engine

Numerous or extended attempts to start the engine may damage the catalytic converter due to non-combusted fuel.

Avoid numerous and extended attempts to start the engine.
Observe the following points during starting assistance and when charging the battery:
  • only use undamaged jump leads/charging cables with a sufficient cross-section and insulated terminal clamps

  • non-insulated parts of the terminal clamps must not come into contact with other metal parts while the jump leads/charging cables are connected to the battery/jump-start connection point

  • the jump leads/charging cable must not come into contact with any parts which may move when the engine is running

  • always make sure that neither you nor the battery is electrostatically charged

  • always keep away from fire and naked flames

  • do not lean over a battery

  • when charging: only use a battery charger that has been tested and approved by Mercedes-Benz and read the operating instructions for your charger before charging the battery.

Observe the additional following points during starting assistance:
  • starting assistance may only be provided using batteries with a nominal voltage of 12 V

  • the vehicles must not touch each other

Vehicles with a battery main switch:
check whether the battery main switch is switched on More.
Secure the vehicle using the parking brake.
Vehicles with automatic transmission:
shift the transmission to position .
Vehicles with manual transmission:
shift to neutral.
Switch off the ignition and all electrical consumers.
Open the bonnet More.
Example: jump-start connection point

Right-hand-drive vehicles: the jump-start connection points may be on the opposite side.

Remove the cover from the positive terminal on the donor battery.
First, connect the positive terminal clamp of the jump leads/charging cables to the positive terminal of the other vehicle's battery.
With positive terminal clamp of the jump lead, slide the red protective cap on jump-start connection point back with a clockwise turn.
Connect the positive terminal clamp to the positive terminal of jump-start connection point .
During starting assistance:
start the engine of the donor vehicle and let it run at idle speed.
Connect the negative terminal of the donor battery to the earth point of your own vehicle with the jump lead/charging cable. Begin with the donor battery.
During starting assistance:
start the engine on your own vehicle.
When charging:
start the charging process.
During starting assistance:
let the engine run for a few minutes.
During starting assistance:
before disconnecting the jump lead, switch on an electrical consumer on your own vehicle, e.g. the rear window heater or lighting.

When the starting assistance/charging process is complete:

First, remove the jump leads/charging cables from the earth point and negative terminal of the other vehicle's battery, then from the positive terminal of jump-start connection point and the positive terminal of the other vehicle's battery. Each time, begin at the contacts on your own vehicle.

The red protective cap springs back to its initial position when positive terminal clamp is disconnected from jump-start connection point .

Further information can be obtained at a qualified specialist workshop.

Notes on fuses
WARNING Risk of accident and injury due to overloaded lines

If you manipulate or bridge a faulty fuse or if you replace it with a fuse with a higher amperage, the electric line could be overloaded.

This could result in a fire.

Always replace faulty fuses with specified new fuses containing the correct amperage.
NOTE Damage or malfunctions caused by moisture

Moisture may cause damage to the electrical system or cause it to malfunction.

When the fuse box is open, make sure that no moisture can enter the fuse box.
When closing the fuse box, make sure that the seal of the lid is positioned correctly on the fuse box.

You can find further information on fuses in the vehicle Operating Instructions.

Notes on flat tyres
WARNING Risk of an accident when driving with a flat tyre

A flat tyre greatly impairs driving characteristics, as well as steering and braking.

Do not drive with a flat tyre.
Remove the flat tyre and fit the spare wheel or consult a qualified specialist workshop.
In the event of a flat tyre you have the following possibilities depending on your vehicle's equipment:
  • Vehicles with Mercedes PRO connect: in the event of a flat tyre, you can call breakdown assistance via the breakdown assistance call button in the overhead control panel More.

  • All vehicles: change the wheel More.

Overview of the tyre-change tool kit
Necessary tyre-change tool kit may include, for example:
  • jack

  • wheel spanner

You will find the maximum load capacity of the jack stated on the adhesive label attached to the jack.

The jack is maintenance-free. If there is a malfunction, please contact a qualified specialist workshop.

Vehicles with rear wheel drive

The tyre-change tool kit is located in the stowage compartment above the step of the co-driver's door and in the stowage compartment in the footwell on the co-driver side.

Vehicles with front wheel drive

The tyre-change tool kit is located behind the driver's seat.

Overview of permissible towing methods

In the event of a breakdown, Mercedes-Benz recommends that you have the vehicle transported instead of towed.

NOTE Damage to the vehicle due to towing away incorrectly
Observe the instructions and notes on towing away.
NOTE Damage due to pushing the vehicle

A vehicle with a front wheel drive and automatic transmission may be damaged if it is pushed or towed too far and too fast when the engine is switched off.

Do not push the vehicle more than 15 m faster than at walking pace.

Vehicles with automatic transmission and rear wheel drive: if there is a malfunction, the automatic transmission may be locked in position .

If the automatic transmission cannot be shifted to position , transport the vehicle More. A towing vehicle with lifting equipment is required for vehicle transport.

Vehicles with automatic transmission and front wheel drive: if there is a malfunction, the automatic transmission may be locked in position . You can release the parking lock manually More.

If the automatic transmission cannot be shifted to position , transport the vehicle More. A towing vehicle with lifting equipment is required for vehicle transport.

Manual transmission

Both axles on the ground

Front axle raised

Rear axle raised

Yes, no further than 100 km at 50 km/h

Yes, no further than 100 km at 50 km/h

Yes, no further than 50 km at 50 km/h

Automatic transmission and rear wheel drive

Both axles on the ground

Front axle raised

Rear axle raised

Yes, no further than 50 km at 50 km/h

Yes, no further than 50 km at 50 km/h

Yes, if the steering wheel is fixed in the centre position with a steering wheel lock

Automatic transmission and front wheel drive

Both axles on the ground

Front axle raised

Rear axle raised

No (when the engine is switched off)

Yes (when the engine is running), maximum 5 km at 20 km/h

Yes

No (when the engine is switched off)

Yes (when the engine is running), maximum 5 km at 20 km/h

All-wheel drive

Both axles on the ground

Front axle raised

Rear axle raised

Yes, no further than 50 km at 50 km/h

No

No

Towing with a raised axle: towing should be performed by a towing company.