Lights, windscreen wipers and climate control
To adjust the automatic driving lights:
turn combination switch controller
to the
position.
To switch on low beam:
turn combination switch controller
to the
position.
The indicator lamp on the instrument cluster will light up.
The engine must be switched on.
To switch high beam on and off:
turn combination switch controller
to the
or
position.
To switch on: press the combination switch in the direction of arrow
.
To switch off: move the combination switch back to its starting position.
If the high beam is switched on, the indicator lamp on the instrument cluster will light up.
To trigger headlamp flashing:
pull the combination switch in the direction of arrow
.
To adjust the standing lights:
turn combination switch controller
to the
position.
To switch the fog light and rear fog light on and off:
turn the combination switch middle ring
to the desired mark:
Fog light
Rear fog light
Once it has been released, the combination switch middle ring will automatically return to the neutral position.
Turn the combination switch to the desired position.
Automatic wiping (vehicles with rain sensor):
Push the combination switch into the
position.
Adjust the wipe frequency with controller
.
To switch on intermittent wiping
Push the combination switch into the
position.
Adjust the wipe frequency with controller
.
During automatic wiping, an appropriate wipe frequency will be set according to the rainfall.
To wipe with washer fluid:
pull the combination switch in the direction of the arrow
.