- smart fortwo
- EQ fortwo
- 08/2020
Lights, windscreen wipers and climate control
Automatic driving lights and low beam
To adjust the automatic driving lights:
turn combination switch controller to the 
position. To switch on low beam:
turn combination switch controller to the 
position. The indicator lamp on the instrument cluster will light up.
High beam, headlamp flashing and standing lights
The engine must be switched on.
To switch high beam on and off:
turn combination switch controller to the or 
position. To switch on: press the combination switch in the direction of arrow 
.
. To switch off: move the combination switch back to its starting position.
If the high beam is switched on, the indicator lamp on the instrument cluster will light up.
To trigger headlamp flashing:
pull the combination switch in the direction of arrow 
. To adjust the standing lights:
turn combination switch controller to the 
position. Front and rear fog lights
To switch the fog light and rear fog light on and off:
turn the combination switch middle ring to the desired mark: 
Fog light 
Rear fog light Once it has been released, the combination switch middle ring will automatically return to the neutral position.
Windscreen wipers
Turn the combination switch to the desired position.
Automatic wiping (vehicles with rain sensor):
Push the combination switch into the position.
position. Adjust the wipe frequency with controller .
. To switch on intermittent wiping
Push the combination switch into the position.
position. Adjust the wipe frequency with controller .
. During automatic wiping, an appropriate wipe frequency will be set according to the rainfall.
To wipe with washer fluid:
pull the combination switch in the direction of the arrow . 
Air conditioning control panel
Increases blower speed
Windscreen heater
Air-recirculation mode
Rear window heater
Demister vents
Centre and side air vents
Footwell vents
Switches on automatic climate control
Switches off automatic climate control
Climate control
Reduces blower speed