Notes on adjusting the lights when driving abroad
The headlamps will automatically be adjusted when the vehicle crosses the border into countries in which traffic drives on the other side of the road and will retain their full range of functions. If necessary, the headlamps can also be adjusted manually in the Low beam menu More.
In the following cases, check the setting of the headlamps and change it manually if necessary:
If the Dipped-beam setting (left/right-side traffic) Manual adjustment only display message is displayed.
If the Check dipped-beam setting (left/right-side traffic) display message is displayed.
Following manual adjustment:
Oncoming traffic will not be dazzled.
The edge of the road will not be illuminated as far or as high.
The "motorway mode" and "enhanced fog light" functions will not be available.
Notes on regularly inspecting wheels and tyres
WARNING Risk of injury due to damaged tyres
Damaged tyres can cause tyre pressure loss.
Check the tyres regularly for signs of damage and replace any damaged tyres immediately.
WARNING Risk of aquaplaning due to insufficient tyre tread
Insufficient tyre tread will result in reduced tyre grip.
The risk of aquaplaning is increased on wet roads, especially when the speed of the vehicle is not adapted to suit the conditions.
Thus, you should regularly check the tread depth and the condition of the tread across the entire width of all tyres.
Minimum tread depth for:
Summer tyres: 3 mm
M+S tyres: 4 mm
For safety reasons, replace the tyres before the legally-prescribed limit for the minimum tread depth is reached.
Carry out the following checks on all wheels regularly, at least once a month or as required, for example, prior to a long journey or driving off-road:
Check the tyre pressure More.
Visually inspect wheels and tyres for damage.
Check the valve caps.
Visual check of the tyre tread depth and the tyre contact surface across the entire width.
The minimum tread depth for summer tyres is 3 mm and for winter tyres 4 mm.
Removing the safety vest
The safety vests are located in stowage spaces in the front door.
Take the safety vest bag out of stowage space 
.
. Open the safety vest bag and pull out the safety vest.
Safety vests can also be stored in the rear door stowage spaces.
The requirements defined by the legal standard are only fulfilled in the following cases:
the safety vest is the correct size
the safety vest is fully closed whilst being worn
Replace the safety vest in the following cases:
the reflective strips are damaged or dirt on the reflective strips can no longer be removed
the maximum number of washes is exceeded
the fluorescence has faded
Removing the warning triangle
Push both sides of warning triangle holder in the direction of the arrow and open it.
in the direction of the arrow and open it. Remove warning triangle .
. First-aid kit (soft sided)
First-aid kit (soft sided) is located on the right-hand side of the boot and is secured with Velcro strip .
Map data update overview
As the content of a digital road map has a short life, outdated data may have a negative effect on all navigation functions. For the best MBUX navigation experience, you should install all of the map updates offered by Mercedes-Benz.
The following options are available for the update of map data:
Online map update
Updates from the Mercedes me Portal
Update at a Mercedes-Benz service centre
Additional costs can be incurred in this process.
Online map update
Requirements:
Mercedes me connect is available.
You have a Mercedes me user account.
The Online Map Update service is available for your region.
The service has been activated.
The Online Map Update service is only available in certain countries.
Installation takes place in the background as an automatic map update.
The MBUX multimedia system installs all of the available map updates for the European regions in which the vehicle is located or is moved.
The Online Map Update is activated at the latest when the engine is next started.
Updates from the Mercedes me Portal
The map data for several regions can also be updated manually. Log in with your Mercedes me user account at: Mercedes me Login
Follow the menu path My Mercedes Me account > My vehicles > Selection of car > Online Map Update. Select the regions to be downloaded to a storage medium.
After the map data has been copied, connect the storage medium with your vehicle. Select the notification with information about a new version of the map data and start the installation. After the MBUX multimedia system has been restarted, the updated map data is used.
Entering a POI or address
Requirements:
Observe the notes on destination entry More.
For online search: an Internet connection is established .
Mercedes me connect is available.
You have created a Mercedes me user account.
The vehicle is connected with the user account and you have accepted the Mercedes me connect terms of use.
Further information can be found at: Mercedes me Homepage
The service is available and has been activated.
Multimedia system:
Where to?
Example: entering a POI or address
Enter a destination. The entries can be made in any order.
The search results are displayed in a list.
Online search results for POIs may contain additional information, for example opening times and prices. The information is provided by an online map service.
This online function is not available in all countries.
The following entries can be made, for example in :
: Hide the keyboard with 
.
. Select the destination in the list.
The route is calculated in the following menu.
Searching for radio stations using station names or frequency entry
Multimedia system:
RadioSelect 
.
. Enter a station name or frequency.
Select a station.