Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Accept
  • EQC
  • SUV
  • 01/2021
app store google play
X

Print
Resetting values on the Trip menu of the on-board computer
On-board computer:
Trip
You can reset the values of the following functions:

  • Trip distance

  • Trip computer From start and From reset

  • ECO display More

To select the function to be reset:
swipe upwards or downwards on the left-hand Touch Control.
Press the left-hand Touch Control.
Select Yes .
Press the left-hand Touch Control.

If you press and hold the left-hand Touch Control, the values of the function will be reset immediately.

Related topics
Topping up the windscreen washer system
WARNING Risk of injury due to drive system overheating
If you open the bonnet in the event of an overheated drive system or fire in the engine compartment, the following situations may occur:

  • You may come into contact with hot gases.

  • You may come into contact with other escaping hot operating fluids.

In the event of overheating or a fire in the engine compartment, keep the bonnet closed and call the fire service.
Allow the overheated drive system to cool down if the engine must be opened.
WARNING Risk of injury due to moving parts

Components in the engine compartment can continue to run or start unexpectedly even when the drive system is switched off.

Observe the following if the bonnet must be opened:

Switch off the drive system.
Never touch the danger zone surrounding moving component parts, e.g. the rotation area of the fan.
Remove jewellery and watches.
Keep items of clothing and hair away from moving parts.
WARNING Risk of burns from hot components in the engine compartment

Certain components in the engine compartment may be very hot, e.g. drive system and cooler.

Allow the drive system to cool down and touch only the components described below.
WARNING Risk of fire and injury from windscreen washer concentrate

Windscreen washer concentrate is highly flammable.

Avoid fire, naked flames, smoking and the creation of sparks when using windscreen washer concentrate.
Remove cap by the tab.
Top up the washer fluid.
Related topics
Replacing the windscreen wiper blades
WARNING Risk of becoming trapped if the windscreen wipers are switched on while wiper blades are being replaced

If the windscreen wipers begin to move while you are changing the wiper blades, you can be trapped by the wiper arm.

Always switch off the windscreen wipers and ignition before changing the wiper blades.
Moving the wiper arms into the replacement position
Switch the ignition on and then off again immediately.
Within around 15 seconds, press and hold the button on the combination switch for approximately three seconds More.

The wiper arms will move into the replacement position.

Replacing the windscreen wiper blades
Observe the information about the maintenance display.
Maintenance display
Remove protective film from the maintenance display on the tip of the newly fitted wiper blades.

When the colour of the maintenance display changes from black to yellow, the wiper blades should be replaced.

The duration until the colour changes varies depending on the usage conditions.

Related topic
Information on washing the vehicle in a car wash
WARNING Risk of an accident due to reduced braking power after washing the vehicle

Braking efficiency is reduced after washing the vehicle.

After the vehicle has been washed, brake carefully while paying attention to the traffic conditions until braking power has been fully restored.
NOTE Damage from automatic braking
If one of the following functions is switched on, the vehicle brakes automatically in certain situations:

  • Active Brake Assist

  • Active Distance Assist DISTRONIC

  • HOLD function

  • Active Parking Assist

To avoid damage to the vehicle, deactivate these systems in the following or similar situations:

during towing
in a car wash
NOTE Damage due to unsuitable car wash
Before driving into a car wash make sure that the car wash is suitable for the vehicle dimensions.
Ensure there is sufficient ground clearance between the underbody and the guide rails of the car wash.
Ensure that the clearance width of the car wash, in particular the width of the guide rails, is sufficient.
To avoid damage to your vehicle when using a car wash, ensure the following beforehand:

  • Active Distance Assist DISTRONIC is deactivated.

  • The HOLD function is switched off.

  • The 360° Camera or the reversing camera is switched off.

  • The side windows and sliding sunroof are completely closed.

  • The blower for the ventilation/heating is switched off.

  • The windscreen wiper switch is in position .

  • The key is at a minimum distance of 3 m away from the vehicle. Otherwise the tailgate could open unintentionally.

  • In automatic car washes with conveyor systems:

    • Neutral is engaged.

    • If you would like to leave the vehicle while it is being washed, make sure the key is located in the vehicle. The park position is otherwise automatically engaged.

If, after the car wash, you remove the wax from the windscreen and wiper rubbers, this will prevent smearing and reduce wiper noise.

Related topics