1. Exterior
2. 1. Opening and closing
   2. Engine compartment
   3. 1. Bonnet
      2. Engine oil
      3. Coolant
      4. Washer fluid reservoir
      5. Battery
   4. Refuelling
   5. Boot
   6. Roof
3. Interior

Engine compartment

1 Coolant expansion tank 2 Cap 3 Marker bar

Checking the coolant level Slowly turn cap 2 anti-clockwise half a turn and allow the pressure to escape. Turn cap 2 further anti-clockwise and remove it. If the coolant reaches marker bar 3 in the filler opening when cold, there is sufficient coolant in coolant expansion tank 1. If the coolant is approximately 1.5 cm higher than marker bar 3 in the filler opening when the vehicle has warmed up, there is sufficient coolant in coolant expansion tank 1.
6 / 8